This command displays the log of the messages that were output to the console when the controller was started.
Show StartupLog
Prerequisites
None
Parameters
None
Remarks
This is a diagnostic command that re-displays the console output messages that were generated when the controller was started. These messages include information on the controller firmware, the GPL system and any errors that occurred when the system was coming up.
The message log has a fixed limited length, so if many errors were generated, only the first messages are preserved and re-displayed.
Examples
Show StartupLog
dBUG MPC5200 MIDS2 8MB Version 1.34, Mar 23 2006 14:17:17
Copyright 1995-2003 Motorola, Inc. All Rights Reserved.
CPU: MPC5200 v1.2
Clocks: Core=400.00 MHz, SDRAM=100.00 MHz, IPBI=100.00 MHz, PCI=50.00 MHz
SDRAM: 00000000 - 00FFFFFF = 16 MBytes SDR
Flash: FF800000 - FFFFFFFF = 8 MBytes
FPGA: Version mids_top.ncd for 3s1500fg456, 2007/01/08 23:15:51
FPGA: Load succeeded (0)
LOADER: System loaded
MBIST: ok
Guidance 3400
GPL 1.4A1, Jan 28 2007, Beta Release
Copyright (c) 2005-2007 by Precise Automation, Inc
System Options: 0000-0000-0000-0001
01-28-2007 20:59:30
Welcome to the GPL Console
GPL:
See Also